Professional Sand and Seal Services in Winter Springs FL
Give it a couple of seasons and the joint sand starts washing out, weeds creep in between the stones, and that crisp, freshly-laid look fades away. That’s exactly why our sand and seal service Winter Springs, FL homeowners rely on Ron Hodges Inc to lock the joints back down, restore the surface, and add a layer of protection that actually holds up against Central Florida weather.
Years in Winter Spring
Rate
Quality Focused
Protect Your Pavers' Beauty for Years to Come
Pavers are an investment. Between the labor and the material, most homeowners spend thousands of dollars getting their driveway or patio installed and it shows, at least for the first year or two. Then the color starts to dull, the joints loosen up, and the whole surface just looks… older than it is. That’s not a paver problem. That’s a maintenance problem, and it’s fixable.
Our paver sand & seal Winter Springs FL service replaces washed-out joint sand with polymeric sand that locks in place, then finishes the surface with a sealer that brings the color back and shields it from sun, rain, and everyday wear. The result is a paver surface that looks like it did on installation day and stays that way a lot longer.
Turn Loose, Faded Pavers Into a Locked-In, Sealed Surface
Turn loose, faded pavers into a secure, refreshed surface with professional polymeric sand and sealing. We restore washed-out joints, stabilize shifting pavers, help prevent weeds and ants, bring back rich color, and add a protective finish that helps water bead off. Our complete service handles cleaning, joint repair, sanding, and sealing in one visit—so your pavers look better, stay stronger, and require less maintenance.
Trusted Paver Sand & Seal Services in Winter Springs
Ron Hodges Inc has been doing concrete and paver work in Central Florida for over 30 years, and sand and seal is one of the jobs we get called back for the most because it’s the kind of service that has to be redone right, or it doesn’t hold up. A few reasons Winter Springs homeowners keep choosing us for this:
- Florida-ready solutions: We use products and methods designed to handle Winter Springs’ rain, humidity, and strong UV exposure.
- Proper prep, every time: We thoroughly clean, re-sand, and prepare your pavers before sealing for a stronger, longer-lasting finish.
- Clear, upfront pricing:Know your cost before work begins—no surprise charges or pressure.
- Work we stand behind: We focus on quality results and make it right if something isn’t up to standard.
Polymeric Sand & Sealing for Lasting Paver Protection
Give your pavers a stronger, cleaner finish with professional polymeric sand installation. We fill and stabilize the joints to help reduce shifting, weeds, and ant activity while providing a durable solution built for Florida’s rain and humidity.
Once the joints are properly prepared, we apply a professional-grade paver sealer to refresh color, add the finish you want, and help protect against UV fading, stains, mildew, and water damage. Ready to restore and protect your pavers? Contact Ron Hodges Inc today for a quote.
Our Proven Sand &
Seal Process
We make sand and seal simple, thorough, and stress-free from start to finish. We inspect your pavers, deep-clean the surface, remove worn joint material, install fresh polymeric sand, and allow it to set properly before applying a professional-grade sealer. The result is a cleaner, more stable, better-protected surface with refreshed color and a finish designed to handle Florida weather.
Inspection
We walk the area and check the current condition of the joints, sand, and surface before quoting anything.
Deep clean
Pressure washing removes dirt, algae, and old residue so the sealer has a clean surface to bond to.
Re-sanding
Polymeric sand goes into every joint, then gets activated and compacted so it locks in properly.
Drying time
We let the sand cure fully before sealing, rushing this step is where a lot of sealing jobs go wrong.
Sealing
The sealer gets applied evenly across the whole surface, protecting the color and finish underneath.
Sand & Seal FAQs
How long does polymeric sand last before it needs to be replaced?
With proper installation, polymeric sand typically holds up for 3 to 5 years before it needs attention again — though heavy rain seasons in Florida can shorten that if the original job wasn’t done right.
Do I need to reseal every time I get sand replaced?
Not necessarily, but they’re usually done together. Since we already have the joints cleaned and freshly sanded, it’s the ideal time to reseal too — doing both in one visit is more cost-effective than paying for two separate trips.
Will sealing change the color of my pavers?
It can restore faded color back closer to original, and depending on the sealer you choose, it can add a slight sheen. We’ll walk you through the finish options before we start so there are no surprises.
How soon can I walk or drive on the pavers after the job is done?
Foot traffic is usually fine within 24 hours. For driveways, we’ll give you specific timing based on the sealer used and the weather that day.
Do you offer this service for pool decks and patios, or just driveways?
All of the above. Sand and seal works the same way whether it’s a driveway, walkway, patio, or pool deck — we adjust the approach slightly based on sun exposure and foot traffic.
Explore Our Recent Projects
Take a look at some of the driveways, patios, and pool decks we’ve recently brought back to life around Winter Springs and the surrounding area. Before-and-after is really the best way to see what this service actually does.
Let's Build the Patio You've Been Dreaming Of
If you're ready to stop putting up with a cracked, dated, or nonexistent patio, Ron Hodges Inc is ready to help. Reach out for a free quote and let's talk about what your backyard could actually look like.
📞 (407) 947-8843